A rare diamond, a jewel box, and a jewel case with ‘poison ivy’

An unusual diamond box that had “poison Ivy” inside and was found inside a jewelry box in India has been sold by a museum for more than $1 million.

The diamond box was found at the Gurgaon mansion of one of India’s richest men, Gaurav Gaur.

It had been kept in the mansion since 1996, and the diamond box itself had never been seen.

But its contents have now been identified as jewels.

The box was discovered when the house’s security guard was cleaning out the garage and noticed a box with a silver chain inside the jewelry box.

The guard then took it to the Gaurv’s office to check the contents, which contained gold jewelry, diamond rings, and an emerald-encrusted necklace.

The jewel box had been used to store jewelry.

The jewelry box was part of a diamond box belonging to Gaur’s son, Vijay, who was born in the house in the mid-1970s.

The box was owned by Vijay’s younger brother, Arun, who had inherited the house from his father.

Arun was later arrested and charged with murder.

He was later acquitted.

A police team had previously found the box in a garage of the house, but they were unable to identify the diamond, which had been removed from its box and thrown into a pond.

“It was the only diamond box we found,” said Inspector S. Raghav, a local police officer.

A local jeweler said the box was one of the most valuable in the country.

“Its value is around five million rupees,” said Pankaj Pandey, adding that there was no evidence the jewelry was sold on the black market.

“This box will remain in my shop for many years.”

The diamond boxes of India have often been used for business purposes, said the jeweler.

“Sometimes the jewellers will give these boxes to businessmen and give them a chance to own them.

They get a good profit from them.”

WATCH: Watchmaker Vitaly jewelry makes an impression on me

I have to admit, when I saw the new Vitaly Watch, it was a bit of a shock.

It’s a smartwatch, but I don’t think I could get behind it as much as the one I’ve worn since the beginning of this article.

The watch is not a luxury watch.

It does not have the luxury of being $1,000 or $2,000.

It is a watch that is built to last.

But its price tag also means that it is not just for a man with a taste for flashy watches.

Vitaly watches, which have been available in various sizes for the past five years, have been around for a very long time.

And while the watch is a smart watch, it is also a luxury piece.

I don, in fact, think a luxury product can have a niche appeal like that.

But I think it can.

There is a reason why most watches are made with platinum and not stainless steel.

There are a few that are made from a higher quality, like the Rolex GMT-Master , which has an overall price tag of $8,000, but it is made with the finest of materials and has the ability to withstand extreme weather.

But the most important reason to invest in a watch is its longevity.

I am not going to say that the watch itself will last forever, but if you are willing to pay the premium, it should be good for a long time to come.

I’m not the only one who has been impressed with Vitaly’s new watch.

I was also impressed by the watch as I was reviewing it in April, so I had an opportunity to get a good look at the new watch for myself.

The new Vitalys watch, the Rolexes GMT-2400 , is an automatic watch that uses a GPS chip.

It uses a magnetic display, which can be easily swapped out for a dial that is much simpler to read.

There isn’t much more that you can tell about the watch, aside from its price.

The watch is built around a GPS, which is powered by an 18650 lithium battery.

I had never heard of a GPS battery until I had recently seen a review of a new GPS-powered GPS watch, called the Navi by TAG Heuer.

That watch, which costs $3,400, uses a 3,000mAh battery.

That battery has a built-in GPS, but there is no GPS chip on it.

So the Navis GPS is just an off-the-shelf GPS chip that is connected to a phone and that is powered entirely by a smartphone.

The GPS chip is a piece of silicon that is made up of a magnetic field and is designed to be placed on a watch.

If you place a magnet on the chip, then a magnetic sensor on the watch will then pick up the magnetic field.

It will then read out the position of the magnetic sensor and when it finds a position that is in line with what you want it to, it will read out an “ok” or “not ok” signal to your phone.

You can choose to use this off-shelt GPS chip or if you want to put it on a GPS watch and have it communicate with your phone to send an alert to your wristwatch when the watch detects movement.

The Navi uses this off the shelf GPS chip and the phone app for the watch to send the alerts.

I was really impressed with the design of the watch.

Its not super futuristic, but its not too different from other smartwatches that I have reviewed.

The bracelet is very slim, and there is a good balance of width and length that allows the watch body to fit comfortably over the wrist.

There really is no need to take the bracelet off when wearing the watch in public.

It really is the only part of the wrist that is covered by the bracelet.

The wrist band is also quite slim and easy to remove when not in use.

I like the fact that the Navies strap does not protrude past the strap on the strap side of the bracelet and that the straps are also quite wide.

The strap on my watch is also rather long, but the watch bands are not too long.

I also like the way the strap is tied to the strap.

It looks very comfortable.

The strap is actually very light and does not feel as bulky as some other watches I have seen, but that doesn’t mean that the strap does nothing.

I would expect that the same would be true of the straps on many other watches, but for the Navias strap it feels as lightweight as it should.

I personally find the straps a little tight, but since the strap and bracelet are not very heavy, I was able to fit the strap comfortably on my wrist.

The straps are made of nylon, which means that they are not going out of style and are not bulky either.

When you put the strap around the wrist, you will feel a slight pull, which helps prevent it

How to wear your Disney Disney Princess necklace

Disney princess necklace is back in style with a new twist.

While many people wear their Disney princess jewelry in the shape of an eagle or dragon, this Disney princess bracelet uses the feathers to represent the Disney princesses.

Disney princesses were first introduced in 1937 with the publication of the first issue of Disney’s “Pixar” magazine.

The Disney princess chain has since been expanded to include more than 20 films and a host of other media, including “Star Wars,” “Frozen,” “Aladdin,” “Alice in Wonderland,” “A Midsummer Night’s Dream,” “Pinocchio,” “The Little Mermaid,” “Beauty and the Beast,” “Winnie the Pooh,” “Zootopia,” “Maleficent,” “Pirates of the Caribbean: The Curse of the Black Pearl,” and “The Lion King.”

With all of this Disney Princess jewelry, the first question to ask yourself is, “Is this really going to work??”

The answer is “yes” according to Krista Wiggin, owner of Disney Princess Jewelry Box, a specialty jewelry store in Los Angeles.

“I think a lot of people were skeptical at first because they were looking at the feathers as if they were a bird, but I can tell you, they are really cool,” Wiggins said.

Wiggens sister, Katie Wiggins, said she’s never been disappointed by the feathers.

I think people will be surprised.” “

I can always tell who is a real Disney princess by looking at them.

I think people will be surprised.”

Wigs sister has been making her own Disney princess bracelets since 2012.

She started by designing her own necklace and then began to custom-tailor her pieces to suit her personal style.

Katie Wiggs Disney Princess Bracelets are available in sizes from 4 inches to 18 inches.

One of her favorites is a 5-inch necklace that she wears to Disney events like Comic-Con.

Another of her favorite items is a 3-inch Disney Princess bracelet.

A 4-inch bracelet is a popular choice among women who want something a little more elaborate.

In addition to making her Disney princess ring, Wigglins also makes a necklaces, bracelets, earrings, and necklacing bracelets.

Each item is handmade in her shop, which is located at 1655 South Wilshire Blvd., Los Angeles, California 90034.

For more Disney Princess news, visit the Disney Princess Facebook page and the Disney Wigs Pinterest page.

Read or Share this story: http://usat.ly/1XKZjq7